Reptile Mast FIBRA 100 SDM

The Mast works optimal on the most of the sail brand (Naish, Severne Sails, Goya, Duotone, Neil Pryde, GA Sails, Gun Sails, Simmer Style, KA Sails, Challenger Sails, Hot Sails, S2Maui, RRD, Aereotech Sails, Sailworks, Vandal)

The Reptile Fibra 100 SDM is the windsurf mast that contains 100% carbon fiber, dedicated to slalom, race and foil competitions. Maximum performance without any compromise.

Presentation

Without a shadow of a doubt it is the best performing windsurf mast of the entire Reptile line. With a very low gravity center and a very high dynamic response (reflex), the Fibra 100 SDM is a product on which every year we spend more time and resources to improve it, making it lighter, more reliable, technical and resistant. The Fibra 100 SDM is therefore the model that has benefited from more changes than the other components of the FIBRA collection. It is the race mast par excellence, and it is the one that undergoes the worst stresses caused by sails with exaggerated curves, compression camber and boom that ovalize the wall. It therefore presents itself with a whole new guise. After careful FEM analysis, the FIBRA 100 SDM was coated with a special fabric with high mechanical characteristics, the CBX carbon which enhances the reflex and increases its resistance in compression and torsion. The ferrule in special T900 fiber has been increased compared to past editions. Constant Curve, suitable for all sails on the market.

The autoclave cure cycle is a two-step process. First, vacuum and pressure are applied while the temperature is ramped up to an intermediate level and held there for a short period of time. The heat reduces the resin viscosity, allowing it to flow and making it easier for trapped air and volatiles to escape.

Those who buy this product are aware that they are buying a windsurfing mast with high technical characteristics. The perfect windsurf mast for endless hours of slalom and freeride, which will transform your windsurf sails into something light, fast, responsive.

Technical details

- T800 Carbon fibers
- CBX Full Bottom Shield
- Identification code to trace the production batch.
- Fiber treatment cycle in an autoclave.
- The exclusive Reptile measuring system, which allows us to identify and measure 10 key points along the entire length of the mast, in order to increase the level of compatibility on the sails on the market.
- Automated cutting system of carbon skins, to ensure greater precision in the construction phase.
- Matte finish to facilitate the insertion of the mast into the sail pocket and facilitate the rotation of any camber.

- Equalized length technology, lowers the center of gravity of the shaft and reduces the overall length of the shaft when it is divided into two parts.

- Cylindrical ferrule in T900 fiber to increase the precision in the connection between top and bottom and increase performance by 20%.

Product Details